WHAT IS A BEAD FILTER
Bead filters clean pond water by pumping the water in through a plastic chamber filled with thousands of plastic beads packed together. The water is pressed under the pressure of a pump and dirt particles remain stuck in the beads. The bead filter traps organic materials, dirt, and other debris.
There are two types of filtration. The type of filtration you use is the key to having a healthy pond. There are mechanical filters that remove debris, algae mats, and leaves. Then there are the biological filters that provide a place for beneficial bacterial to reside and remove nutrients.
The beads float at the top allowing the water to pass through but trapping the dirt and debris. The standard pond bead filter acts as biological and mechanical filtration. With the standard bead filter there is low water loss and never needs to be replaced.
Bead filters are different from other filters by the use of the plastic floating beads at the top. The pond water stays clean because the dirt and debris are captured inside the filter tank and not on the bottom of the ponds.
Get a bead filter that is for you size pond or a larger one. You can not have to much filtration but you will have a problem if you don't have enough filtration.
Top Rated Pond Bead Filters of December 2024
HOW DO YOU CLEAN A BEAD FILTER
They are easy to clean. Once you do it a few times it will become second nature.
Turn the main pump off. Then move the filter value handle, the multiport value onto the "backwash" position. Open the drain valve at the bottom and open the air valve at the top of the filter. Turn on the pump and let the pump run for 30 to 45 seconds so they are moving. Inspect the glass drain line and you will be able to see all the dirty. When the water starts to run clear shut off the pump.
Move the valve handle to the "rinse". If you have a blower, move the multiport head to rise. Open the ball valve and turn on the blower. Once the blower is running watch the top closure lid to see when the bead media begins to tumble. Now with the blowing still running turn the filter to backwash.
This reversed the airflow so that the dirty and waste is push through the bottom of the filter and out the waste line The blower reduces the amount of water that is needed to complete the processor. Turn the blower off and ball value and turn the pump back on. This step will clean any debris left in the filter. Any dirty will go back to the waste line. Move the multiport head to the filter turn the pump off and you are finished.
ARE BEAD FILTER ANY GOOD?
Bead filters have water quality and do a better job than other filters. If you have a nice pond you don't want to have a big award and filter right by the pond. The Bead filters are pressurized so they can be located away from the pond.
All bead filters have a way to reverse the flow of water and flush out the debris that has built up. This is called backwashing. Most use an air blower to do this. Some use a mechanical device to break up the beads, so less water is needed for backwashing.
Bead filters are pressurized vessels. They foster healthy water cleaning bacteria that process organic materials, such as fish waste. Bacteria helps breaks down fish toxic ammonia and creates healthier fish in your pond.
Bead filters have both mechanical and biological filtration, which serves a dual purpose in a single unit.
Some of the great advantages of bead filters are excellent biological filtration, superior solids removal, superior solid capture, low water loss, never needs to be replaced, and low maintenance.
