Skip to main content
ponddoc.com

Back to all posts

How Much Do Pool Slides Cost?

Published on
4 min read

Table of Contents

Show more
How Much Do Pool Slides Cost? image

Pool slides can vary in cost depending on various factors. On average, a basic pool slide can cost anywhere from $1,000 to $3,000. However, more elaborate and larger pool slides can cost upwards of $5,000 to $10,000 or more. The price can also depend on the materials used, size, design complexity, and additional features like water jets or lighting. Additionally, installation costs should be considered which can range from a few hundred dollars to several thousand dollars, depending on the complexity of the installation process and any necessary modifications to the pool. It's advisable to research different options, compare prices, and consult with professionals to find a pool slide that fits your budget and requirements.

What is the average lifespan of a pool slide?

The average lifespan of a pool slide can vary depending on various factors such as the material used, maintenance, usage frequency, and environmental conditions. However, a well-maintained pool slide typically lasts between 10 to 20 years. It is important to regularly inspect and maintain the slide to ensure its longevity.

What is the cost of pool slide installation?

The cost of pool slide installation can vary depending on various factors such as the type and size of the slide, the location of the pool, the complexity of the installation process, and additional features or accessories required.

On average, the cost of pool slide installation can range from $1,500 to $5,000 or more. Basic slides may cost around $1,500 to $2,500, while larger or more elaborate slides with additional features like water jets or safety features can cost $3,000 to $5,000 or higher. Professional installation and any necessary permits or additional construction work may also add to the total cost.

How to safely remove and store a pool slide for winter?

To safely remove and store a pool slide for winter, follow these steps:

  1. Gather necessary tools: You will need a wrench to remove bolts or screws, a drill with a screwdriver head, and a tarp or cover to protect the slide during storage.
  2. Drain the water: Before attempting to remove the pool slide, ensure that the pool is drained properly. This will make the process easier and prevent any accidents. Follow the manufacturer's instructions for draining your specific type of pool.
  3. Disconnect the slide: Identify the points where the pool slide is attached to the pool deck or frame. Use the wrench or drill to remove any bolts or screws securing the slide to the structure. Keep track of all hardware to reassemble the slide later.
  4. Disassemble the slide if necessary: Some pool slides may have detachable sections, such as a ladder or multiple slide pieces. If your slide can be easily separated, disassemble it according to the manufacturer's instructions.
  5. Clean and dry the slide: Thoroughly clean the pool slide to remove any dirt, debris, or mildew. Use mild soap and water, and scrub the entire surface with a soft brush. Rinse the slide thoroughly and allow it to air dry completely.
  6. Wrap and protect the slide: Once dry, wrap the slide with a tarp or cover to protect it from dust, moisture, and UV rays during storage. Secure the cover tightly to prevent any wind damage.
  7. Store the slide in a dry location: Find a dry and secure location to store the pool slide for the winter. Ideally, this would be an indoor area, such as a garage or a shed. If storing the slide outdoors, make sure it is elevated and protected from the elements.
  8. Reassemble the slide in the spring: When the winter season is over and you're ready to reinstall the pool slide, carefully unwrap and inspect it for any damage. Reassemble the slide using the hardware you kept track of and follow the manufacturer's instructions.

Remember, it's important to read and follow the specific instructions provided by the manufacturer for your pool slide, as different slides may have unique disassembly and storage requirements.