Best Shark Vacuum Filters to Buy in October 2025
4+2 Pack Filters for Shark Vacuum Navigator Lift Away Filter Replacement Models NV350 NV351 NV352 NV355 NV356E NV360 UV440 UV540 CU500 XFF350 XHF350
- COMPATIBLE WITH MULTIPLE SHARK NAVIGATOR LIFT AWAY MODELS FOR EASY USE.
- INCLUDES 4 FOAM, 4 FELT, AND 2 HEPA FILTERS FOR COMPLETE FILTRATION.
- WASHABLE AND REUSABLE DESIGN SAVES YOU MONEY AND REDUCES WASTE.
2 + 4 Pack Filters for Shark Vacuum Navigator Lift Away Filter Replacement ZU503AMZ NV350 NV351 NV352 NV355 NV356E NV357 NV360 NV370 UV440 UV540, Parts XFF350 XHF350
-
PERFECT FOR SHARK NAVIGATOR MODELS: COMPATIBLE WITH A WIDE RANGE OF MODELS.
-
HIGH-EFFICIENCY FILTRATION: INCLUDES H13 HEPA FILTERS FOR CLEANER AIR.
-
WASHABLE & DURABLE: EASY MAINTENANCE SAVES YOU TIME AND MONEY.
Shark Replacement Filter Set XFF350 Navigator Lift-Away NV350, NV351, NV3521, Felt + 1 Foam
- PERFECT FIT FOR SHARK NAVIGATOR LIFT MODELS NV355-NV357.
- INCLUDES 2 WASHABLE, REUSABLE FILTERS FOR LASTING VALUE.
- EASY INSTALLATION WITH SHARK EURO-PRO PART XFF350 COMPATIBILITY.
Anewise Filter Replacement for Shark Navigator Lift Away Deluxe Professional Vacuum ZU503AMZ NV350 NV351 NV352 NV355 NV357 NV360 NV370 UV440 UV540, Parts XFF350 & XHF350, 1 HEPA + 2 Pre-Felt Filters
- COMPATIBLE WITH 30+ SHARK NAVIGATOR MODELS FOR WIDE USABILITY!
- PREMIUM FILTERS TRAP DIRT AND ALLERGENS FOR A CLEANER HOME!
- WASHABLE, REUSABLE, AND EASY TO INSTALL-ECO-FRIENDLY CHOICE!
Colorfullife Filters for Shark Rotator Pro Lift-Away NV500, NV501, NV502, NV503, NV505, NV510, NV520,NV552,UV560, Xff500 Xhf500 (Not Fit NV650,NV750 Series)
-
WASHABLE & REUSABLE FILTERS: SAVE MONEY AND REDUCE WASTE!
-
FITS MULTIPLE SHARK MODELS: COMPATIBILITY WITH NV500 SERIES!
-
COMPLETE KIT INCLUDED: 4 FOAM & FELT FILTERS + 2 POST-MOTOR FILTERS!
2 + 4 Pack Vacuum Filters Replacement Compatible for Shark Rotator Pro Lift-Away NV500, NV501, NV502, NV503, NV505, NV510, NV520, NV552, UV560, NV642, ZU780, ZU782, ZU785, Part Xff500 Xhf500
- PERFECT FIT FOR SHARK NV500 SERIES; ENSURE OPTIMAL PERFORMANCE.
- ECO-FRIENDLY MATERIALS ENSURE DURABILITY AND SAFER CLEANING.
- COMPLETE KIT INCLUDES 4 FOAM FILTERS AND 2 HEPA FOR FULL COVERAGE.
Shark VACMOP Disposable Hard Floor Pad Refills, Compatible with VM252 & VM180, No-touch Disposal, For use on ALL Sealed Floors - Stone, Hardwood, Laminate & Tile, (Pack of 3, 30 Count Total), VMP30
-
ULTIMATE CLEAN WITH PADS THAT VACUUM AND LOCK IN DIRT EFFORTLESSLY!
-
WORKS ON ALL SEALED FLOORS-PERFECT FOR EVERY SURFACE IN YOUR HOME!
-
ENJOY NO-TOUCH DISPOSAL-NEVER TOUCH DIRTY PADS AGAIN!
Shark Genuine OEM Foam & Felt Filter Navigator® Zero-M® Pet Pro Upright, Models ZU60, ZU62s, NV151, NV250s, ZU60, ZU62s, OEM Part Number 1239FT60
- ENSURE PEAK PERFORMANCE WITH GENUINE SHARK OEM REPLACEMENT PARTS!
- INCLUDES ESSENTIAL FOAM AND FELT FILTERS FOR SUPERIOR CLEANING.
- VERIFY COMPATIBILITY WITH MODEL NUMBERS BEFORE PURCHASING!
If you're looking to buy Shark vacuum filters, there are several places where you can find them. One option is to visit the official Shark website. They typically have a wide range of filters available for different Shark vacuum models. Additionally, popular online retailers such as Amazon, Walmart, and Best Buy also carry Shark vacuum filters. These platforms often provide user reviews and ratings that can help you make an informed decision. You may also find Shark vacuum filters in-store at locations like Target, Bed Bath & Beyond, or home improvement stores. Remember to check compatibility with your specific model when purchasing the filter to ensure a proper fit.
What is the best method to maintain Shark vacuum filters?
To maintain Shark vacuum filters, follow these steps:
- Regular cleaning: Clean the filters after every few uses or whenever you notice a decrease in suction power. This will prevent dirt and debris from clogging the filters and ensure optimal performance.
- Rinse with water: Most Shark vacuum filters are washable. Remove the filter(s) according to the manufacturer's instructions and rinse them under cold water. Gently squeeze the filters to remove excess water without causing damage.
- Air-dry thoroughly: Leave the filters to air-dry completely before reinstalling them in the vacuum. Ensure they are completely dry to prevent the growth of mold or mildew.
- Clean pre-motor filters: Some Shark vacuums have a foam pre-motor filter. This filter should be removed, rinsed, and air-dried regularly following the same steps mentioned above.
- Replace filters if necessary: Over time, filters may become too dirty or damaged to be properly cleaned. Check your specific Shark vacuum model for recommended replacement intervals and purchase new filters as needed.
- Check for blockages: During filter maintenance, take the opportunity to inspect the vacuum for any blockages in the hoses or brush roll. Clear any debris or clogs to maintain optimal suction.
- Follow the manufacturer's guidelines: Always refer to the instruction manual provided by Shark for specific filter maintenance instructions and recommended cleaning methods.
How to dispose of old Shark vacuum filters safely?
To dispose of old Shark vacuum filters safely, you can follow these steps:
- Remove the filter from the vacuum cleaner. Shark vacuum filters are usually located inside the dust cup or behind the brush roll cover. Refer to your product manual for specific instructions on how to remove the filter.
- Check the type of filter you have. Shark vacuums typically use either foam filters or HEPA filters. Foam filters can often be cleaned and reused, while HEPA filters are generally disposable.
- If you have a foam filter, clean it thoroughly. Rinse the filter under warm water until the water runs clear. Avoid using harsh cleaning agents or chemicals, as they may damage the filters. Squeeze out excess water and let it air dry completely before reinserting it into the vacuum.
- If you have a disposable HEPA filter, place it in a plastic bag to contain any trapped dust or debris. Seal the bag tightly.
- Locate a local recycling center that accepts air filters. Some recycling centers accept foam and HEPA filters for proper disposal. Check with your local waste management facility or search online for recycling programs in your area that specifically handle air filters.
- If recycling is not available in your area, store the sealed bag in a secure place until you can drop it off at a recycling center or arrange for proper disposal.
Note: It's essential to follow specific disposal guidelines, as vacuum filters may contain allergens, dirt, dust, and other pollutants that can negatively impact the environment if not disposed of correctly.
What is the difference between HEPA and standard Shark vacuum filters?
HEPA stands for High-Efficiency Particulate Air, and it refers to a specific type of air filter used in vacuum cleaners. HEPA filters are designed to remove tiny particles like dust, pollen, pet dander, and allergens from the air that passes through the vacuum cleaner.
On the other hand, when we mention standard Shark vacuum filters, it typically refers to the regular filters included with Shark vacuums that may not meet the HEPA standards. These filters are generally designed to remove larger particles and debris from the air but may not be as effective in capturing the smaller and more harmful particles that a HEPA filter can.
In summary, the main difference between a HEPA filter and a standard Shark vacuum filter is the level of filtration. HEPA filters are designed to capture smaller particles and offer a higher level of filtration, making them more suitable for people with allergies or asthma. Standard Shark vacuum filters primarily focus on removing larger debris and particles from the air.
How to replace Shark vacuum filters properly?
To replace Shark vacuum filters properly, follow these steps:
- Power off and unplug the vacuum: Ensure the vacuum is not connected to any power source to avoid any accidents.
- Locate the filter compartment: The filter compartment may vary depending on the model of your Shark vacuum. It is typically located at the front or rear of the vacuum cleaner. Refer to your user manual if you are unsure.
- Open the filter compartment: There may be buttons, latches, or release levers that need to be utilized to open the filter compartment. Follow the instructions in your user manual to open it properly.
- Remove the old filter: Once the filter compartment is open, carefully remove the old filter. Gently pull it out and dispose of it properly. Some models may have multiple filters, so make sure to remove all of them.
- Clean the filter compartment: Before installing the new filters, inspect the filter compartment for any debris or dust. If necessary, clean it using a soft brush or cloth.
- Insert the new filter: Take the new filter and carefully place it into the filter compartment, ensuring it fits properly. Make sure any tabs or protrusions on the filter align with the corresponding slots or grooves in the compartment.
- Close the filter compartment: After inserting the new filter, close the filter compartment by reversing the steps used to open it. Ensure it is securely latched or locked to prevent any air leakage.
- Test the vacuum: Plug the vacuum back in and turn it on to ensure it is working properly with the new filters. Run the vacuum for a few minutes to ensure proper suction and airflow.
- Clean or replace filters regularly: The frequency of filter replacement or cleaning will depend on your vacuum's usage and the type of filter being used. Refer to your user manual for specific guidelines on when and how to clean or replace the filters.
By following these steps, you can replace the filters in your Shark vacuum properly, allowing it to work efficiently and maintain optimal performance.