Best Automatic Pool Cleaners to Buy in October 2025
(2025 Upgrade) Pool Vacuum for Inground Pools, Robotic Pool Cleaner, Wall Climbing Pool Cleaner, Cleans Pool Floors, Drain & Walls & Waterline, Cleaning Up to 2100 Sq.ft, 180 Min
-
POWERFUL 180W MOTOR: ENSURES DEEP CLEANING WITH 4800GPH SUCTION.
-
4 CUSTOM MODES: TAILOR CLEANING FOR ANY POOL SHAPE OR SURFACE.
-
180-MINUTE RUNTIME: FAST CHARGING FOR UNINTERRUPTED POOL CLEANING.
Betta SE Solar Powered Automatic Robotic Pool Surface Skimmer Cleaner with 24/7 Continuous Cleaning Battery Power and Re-Engineered Twin Salt Chlorine Tolerant Motors (Blue)
-
100% SOLAR-POWERED: CONTINUOUS, ECO-FRIENDLY POOL CLEANING!
-
FAST 5-6 HOUR RECHARGE FOR MAX CLEANING WITH MINIMAL DOWNTIME.
-
LARGE DEBRIS BASKET FOR EASY EMPTYING-NO NEED TO REMOVE DEVICE!
(2025 Upgrade) Aiper Scuba S1 Robotic Pool Cleaner, Wall & Waterline Cleaning, Double Filtration, Extended 180-Min Battery Life, Smart Navigation, App Support, OTA Upgrade
-
DOUBLE FILTRATION: CAPTURES FINE DEBRIS FOR CRYSTAL-CLEAR POOL WATER.
-
180-MIN BATTERY LIFE: CLEAN LARGER POOLS WITHOUT FREQUENT RECHARGING.
-
SMART APP CONTROL: MANAGE CLEANING EFFORTLESSLY WITH CONVENIENT APP FEATURES.
(2025 New) Cordless Robotic Pool Cleaner, Robotic Pool Vacuum for Inground Pools, Floor, Wall, Waterline and Drain Cleaning, 180 min Battery Life for Pool Up to 2150 Sq.ft
-
ADVANCED CLEANING: DUAL BRUSHES AND 300ΜM FILTRATION FOR THOROUGH DEBRIS REMOVAL.
-
SUPERIOR MOBILITY: CATERPILLAR TREADS ENSURE STABILITY ON ALL POOL SURFACES.
-
EFFICIENT RUNTIME: UP TO 180 MINS OF CLEANING WITH RAPID 3-HOUR RECHARGE.
TALOSBO Pleco S1 Cordless Robotic Pool Cleaner with 75-80Mins Runtime, 2.5H Fast Charging, Small Pool Vacuum Robot for Above-Ground Flat-Bottom Pools up to 645 Sq.ft, Lightweight, Auto-Parking
- EFFORTLESS CLEANING WITH POWERFUL DUAL MOTORS FOR CRYSTAL-CLEAR POOLS.
- CORDLESS DESIGN LASTS 75-80 MINS; QUICK 2.5-HOUR RECHARGE TIME.
- LIGHTWEIGHT AT 6.4 LBS, DOCKS AUTOMATICALLY FOR EASY CHARGING.
Cordless Robotic Pool Cleaner -Pool Vacuum 180W Brushless Motor, 45,000Pa Suction, Wall Climbing, Sonar Navigation, 3 Modes Automatic Pool Robot for Inground & Above-Ground Pools Up to 2150 Sq. Ft.
- EFFICIENT CLEANING: CLEANS FLOORS, WALLS & WATERLINES FOR CRYSTAL-CLEAR POOLS.
- ONE-TOUCH CONVENIENCE: HASSLE-FREE OPERATION WITH INSTANT START FEATURE.
- POWERFUL SUCTION: 45,000PA SUCTION FOR DEEP CLEANING AND DEBRIS REMOVAL.
Betta SE Solar Powered Automatic Robotic Pool Surface Skimmer Cleaner with 24/7 Continuous Cleaning Battery Power and Re-Engineered Twin Salt Chlorine Tolerant Motors (White)
-
100% SOLAR-POWERED: SELF-OPERATES FOR HASSLE-FREE, ECO-FRIENDLY CLEANING.
-
QUICK RECHARGE: JUST 5-6 HOURS OF SUNLIGHT FOR CONTINUOUS OPERATION.
-
EASY MAINTENANCE: LARGE DEBRIS BASKET FOR SIMPLE, MESS-FREE EMPTYING.
Using an automatic pool cleaner is a convenient way to keep your pool clean and free from debris. Here is a step-by-step guide on how to use an automatic pool cleaner:
- Familiarize yourself with the cleaner: Before getting started, it's important to understand the specific model of automatic pool cleaner that you have. Read the user manual to learn about its features and how it functions.
- Prepare your pool: Remove any large debris from the pool manually, such as leaves or twigs. Ensure that the water level is within the recommended range for your pool cleaner. It is also recommended to clean the pool filter beforehand to ensure optimal performance.
- Set up the cleaner: Depending on the model, you may need to connect the automatic cleaner to either the pool's skimmer or a dedicated suction line. Follow the specific instructions provided by the manufacturer to properly connect the cleaner. Some models may require additional attachments or connections.
- Start the pool cleaner: Once the cleaner is connected, switch on the pool pump to begin circulating the water. This will provide the necessary suction to power the automatic cleaner. Some models may have their own power supply and don't require the pool pump.
- Adjust the settings: If your automatic pool cleaner has adjustable settings, you can choose the desired cleaning mode according to your pool's needs. These settings may include factors such as pool size, cleaning time, or pattern.
- Observe the cleaning pattern: Allow the automatic pool cleaner to run for a few minutes and observe its cleaning pattern. This will help you ensure that the cleaner is covering the entire pool effectively. Adjust any settings or positioning if necessary.
- Monitor and maintain: While the cleaner is operating, regularly monitor its progress and check for any clogs or tangled debris. Clean or replace the cleaner's filter bag or cartridge as needed. Empty any collected debris into a suitable disposal area.
- End the cleaning cycle: Once the pool has been adequately cleaned, turn off the pool pump or power supply to stop the automatic cleaner. Disconnect the cleaner from the skimmer or suction line, following the manufacturer's instructions.
- Store the cleaner: Properly store the automatic pool cleaner, taking care to secure all attachments and components in a clean, dry area. Refer to the user manual for any specific storage recommendations.
- Regular maintenance: Maintain your automatic pool cleaner by regularly inspecting and cleaning its components. Replace worn-out parts or malfunctioning components as necessary to ensure the cleaner's optimum performance.
Remember, each automatic pool cleaner may have its own specific instructions, so always consult the user manual provided by the manufacturer for the most accurate and detailed guidance.
What is the difference between a suction-side, pressure-side, and robotic automatic pool cleaner?
A suction-side automatic pool cleaner is attached to the suction side of the pool's filtration system. It is powered by water being pulled through it, utilizing the pool's existing pump and filtration system. It removes dirt, leaves, and debris by creating suction and pushing them into the pool's filter.
A pressure-side automatic pool cleaner is attached to the pressure side of the pool's circulation system. It is powered by water being pushed through it, usually with a separate booster pump. It uses the pressure from the water to drive gears or turbines, which propel the cleaner around the pool. It collects debris in a bag or filter canister, separate from the pool's filter system.
A robotic automatic pool cleaner is an independent, self-contained unit powered by electricity. It has its own motor and filtration system, so it does not rely on the pool's pump and filter. It is placed in the pool, and it navigates using pre-programmed patterns or advanced sensor technology. It collects debris in its internal filter or bag, reducing strain on the pool's filtration system.
In summary, the main differences are the source of power (pool pump vs. electricity), the method of propulsion (suction vs. pressure vs. independent motors), and how debris is collected and filtered.
How often should I use an automatic pool cleaner?
The frequency of using an automatic pool cleaner usually depends on the specific circumstances and needs of your pool. However, as a general guideline, it is recommended to use an automatic pool cleaner at least once or twice a week to maintain a clean and debris-free pool.
Can I use an automatic pool cleaner with an above-ground pool?
Yes, you can use an automatic pool cleaner with an above-ground pool. There are several types of automatic pool cleaners available, such as robotic cleaners, suction side cleaners, and pressure side cleaners, each with their own advantages and specific compatibility with different pool types. Before purchasing an automatic pool cleaner, make sure to check the manufacturer's recommendations to ensure it is suitable for use with an above-ground pool.
How do I store an automatic pool cleaner?
To properly store an automatic pool cleaner, follow these steps:
- Remove the cleaner from the pool: Start by removing the cleaner from the pool water.
- Disconnect power and water: Turn off the power supply to the cleaner (if applicable) and disconnect it from the water supply.
- Clean and dry the cleaner: Thoroughly clean and dry the cleaner to remove any dirt, debris, or algae that may have accumulated during use. Use a hose or a soft brush to clean hard-to-reach areas if necessary.
- Inspect for damage: Check the cleaner for any signs of damage or wear and tear. If you notice any broken parts or malfunctions, consider getting the cleaner repaired before storing it.
- Drain water completely: Ensure that there is no water left in the cleaner, especially in the hoses and internal components. This will prevent any potential damage from freezing during colder months.
- Disassemble if needed: If your cleaner can be disassembled, carefully follow the manufacturer's instructions to break it down into separate parts. This makes storage more convenient and minimizes the risk of damage.
- Store in a dry and cool place: Find a storage area that is dry, cool, and out of direct sunlight. Avoid storing it in extreme temperatures, as it can affect the durability of the cleaner.
- Use a cover or bag: If possible, use a cover or a storage bag designed specifically for the cleaner. This will provide an extra layer of protection and help keep it clean during storage.
- Keep away from chemicals: Avoid storing the cleaner near or with any pool chemicals to prevent potential damage from exposure.
- Check periodically: Periodically check on the stored cleaner to ensure it remains in good condition. This will help identify any issues early on and prevent further damage.
By following these steps, you can ensure that your automatic pool cleaner remains in good condition and ready for use when the pool season starts again.